Quest For Yarn Quality: Leading Spinner Establishes The Superiority Of Uster’s QUANTUM 3 Clearers
Quest For Yarn Quality: Leading Spinner Establishes The Superiority Of Uster’s QUANTUM 3 Clearers
Mumbai, India | Thursday, 30th Apr. 2015  | By Textile Excellence
 0 Comments    1 Likes     1827 Views          Print   

Ambitious yarn spinners quickly learn that key performance indicators are closely linked to quality – especially at the higher level of the market, as revealed by an example from China. Achieving consistent quality, reducing waste and avoiding the risk of package damage are critical objectives, attainable only by implementing systematic quality management. The USTER® QUANTUM 3 clearers provide the ideal basis for this, with in-process yarn optimization, proven by stringent mill trials and confirmed by laboratory checks.

 

Well-known China based spinner Shandong Liaocheng Huarun Textile which caters to the top segment of the yarn business focuses on super-fine counts made from combed long-staple cottons. The mill – part of the Huarun Group – is among China’s leading producers, exporting 50% of its products to Europe.

 

Reaching this level is tough, staying there even tougher, demanding constant effort to monitor and optimize quality and productivity. That includes choosing the best-available equipment as part of the ideal recipe for success. Against this background, Liaocheng Huarun decided to run a comprehensive practical trial to identify the best yarn clearer to meet its challenging quality and cost goals.

 

The USTER® QUANTUM 3 clearer is known as the preferred choice for many spinning mills producing fine and very fine count yarns for demanding applications such as high-quality woven fabrics. That meant that Liaocheng Huarun had high expectations of the USTER® instrument when comparing it with existing clearers for controlling yarn faults.

 

Proven: better quality, lower waste

In the trial, the USTER® clearers were installed on 60 spindles, matched against a competitive brand’s clearer on similar automatic winders. After a month, the mill assessed the trial results from cuts and remaining faults, using the USTER® CLASSIMAT. This showed that the USTER® QUANTUM 3 left 50% fewer disturbing thick and thin places in the yarn, with 13% fewer cuts per 100 kilometers (see www.uster.com/quantumhuarun for detailed trial results). The overall verdict was that USTER® QUANTUM 3 had proved its ability to deliver better quality and less waste, enhancing the optimization potential of the mill.

 

Modern quality demands not only call for a perfectly cleared yarn suited to the end-use, but must also take in the fact that only a few outlier bobbins can spoil many meters of fabric, resulting in expensive claims. Devising a system to avoid such issues was another key objective of Liaocheng Huarun in running the clearer trials.

 

The USTER® QUANTUM 3 measures yarn quality parameters including CV, imperfections and hairiness, using the Q Data feature, correlated with USTER® TESTER data. These controls allow Liaocheng Huarun to meet its goal of managing outliers in the final yarn package. In the trial, outlier bobbins collected from winding were checked again in the laboratory, using the USTER® TESTER. The laboratory tests confirmed the accuracy of the clearers in identifying these outliers. This systematic quality management, using the Q Data feature of the USTER® QUANTUM 3,means outlier bobbins are no longer a serious risk.

 

 

Key Performance and Quality Indicators

Thomas Nasiou, Head of Textile Technology within USTER says: “For spinners aiming at consistently high standards of yarn quality, systematic quality management is essential. We strongly recommend it as a general policy, since it is the best way to achieve both optimum quality and homogeneity of quality between and within yarn lots.”

 

Key Performance Indicators (KPI) are used to set the yarn quality at the right level. Especially at the end of the production process, KPIs are essential because they have a direct impact on the yarn quality of the package. In winding, for example, eight indicators and checkpoints (such as production, clearer settings, cuts, splices etc.) are applied to manage this last stage of the yarn production process. (See www.uster.com/windingfor the detailed overview and checklist.)

 

“At the end of the day, almost all key indicators impact on quality,” says Nasiou, writing in the latest USTER® NEWS BULLETIN on the subject of `Managing a spinning mill with quality in mind´. “Certainly, clearer cuts and outlier bobbins, for example, are extremely relevant indicators and as much connected to quality as to production efficiency and cost.”

 

Liaocheng Huarun’s dedication to continuous optimization shows how Key Quality Indicators can be applied – in this case maximizing the capabilities of the yarn clearer to monitor and manage clearing limits and quality outliers – to develop successful systematic quality management.

 0 Comments    1 Likes     1827 Views          Print   
Post Your Comment
  
  //   E-PAPER   //   SPECIAL EDITIONS   //   NEWS   //   EVENTS   //    ARCHIVES